Last version of the "KCNet" software package with the assembler-sources for CP/M. It contains the network programs for a "KCNet" interface, read included "KCN_DESC.TXT":
- CPMNET - interface test
- NCFG - network configuration
- PING - ICMP Client and Server
- TFTP - TFTP Client and Server
- WOL - WakeOnLan Client
- NTIME - SNTPv4 Client
- FTP - "full featured" FTP Terminal-client
- NPRINT - print Client for JetDirect print Server
Requirements for the translation:
- MS-Assembler M80.COM, DR-Linker LINK131.COM or MS-Linker L80.COM
- Library SYSLIB.REL (the SYSLIB's are available at Hal Bower's Home Page, look at CP/M-Links)
The translation can be carried out with the help of SUBMIT.COM and one of the two sub-files.
Description (in German only!), circuit diagram, parts list, layout drawing, assembly diagram, assembly instructions and GAL files of the "G"eneric "Net"work card based on the "KCNet" project. This version was designed by Enrico Grämer for use in any Z80 systems.
It is intended primarily for CP/M compatible computers, since the existing network programs can be used immediately. For using the card in other Z80 systems (home computers etc.), the system-specific program components have to be tailored to your own system, the network communication is system independent.
Hardware documents of the KC85 Network & USB module M052. The archive contains the circuit diagram, part list and other files from the layout.
Circuit diagram, part list and GAL-files of the network card for K1520 bus systems. This KCNet based card contains the same network interface and a boot eeprom.
There are some pictures and a (german) description at: http://www.robotrontechnik.de/html/eigenbau/k1520nw.htm
The card recognizes WOL packets that are sent to the MAC of the card and can therefore start appropriate systems from the network.
Description of the Low-Level-Commands for the communication between Z80 system and KCNet-Interface with the PIO device driver.
List of the debug-commands for the communication via terminal program and RS-232 debug interface.
Tool for the DOS command line in Windows, to extract PMA archives (should be placed in a PATH-Directory).
Usage:
LHA-PMA [-]<command>[option][w=<dir>] archive_file [file...]
Example (unpack all archive-files to the current directory):
LHA-PMA E ARCHIV.PMA
LHarc for UNIX V 1.02 Copyright(C) 1989 Y.Tagawa
LHx for MSDOS V C2.01 Copyright(C) 1990 H.Yoshizaki
LHx(arc) for OSK V 2.01 Modified 1990 Momozou
LHa for UNIX V 1.00 Copyright(C) 1992 Masaru Oki
LHA-PMA for UNIX V 2 PMA added 2000 Maarten ter Huurne